179C-0402 Dixon Valve Brass Compression Fitting - 45 deg. Elbow

4.8 (277) · $ 3.00 · In stock

179C-0402 Dixon Brass Compression Fitting is a 45 deg. Elbow, with a 1/4" Tube Size x 1/8" Pipe Thread. The fitting is for use with copper, aluminum and Parflex thermoplastic tubing. Manufactured for low and medium pressure tubing connection wor

Advantages:
No flaring, soldering or other preparation of tubing necessary to assemble. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved.
Specifications:
Underwriter's Laboratories listed for flammable liquid. Compression fittings meet functional requirements of SAE J-512 and ASA.
Assembly Instructions:
Slide nut, then sleeve onto tubing. The thread end of the nut must face out. Insert the tube into the fitting. Be sure the tube is bottomed on the fitting shoulder. Assemble nut to body, and tighten hand-tight. Then follow the number of wrench turns as indicated in the table to the right.

Fitting Size	Tube Size	Turns Required to Seal from Hand-Tight
Fitting Size	Tube Size	60C Series with Soft Metal Tubing	60PT Series with Thermoplastic Tubing
2	1/8	1-1/4	-
3	3/16	1-1/4	-
4	1/4	1-1/4	2
5	5/16	1-1/4	2
6	3/8	2-1/4	2
8	1/2	2-1/4	2
10	5/8	2-1/4	2
12	3/4	2-1/4	2
14	7/8	2-1/4	-

Part Number	Tube Size	Pipe Thread	Material	Weight (Lbs)
179C-0402	1/4	1/8	Brass	0.0435
179C-0404	1/4	1/4	Brass	0.0800
179C-0602	3/8	1/8	Brass	0.0823
179C-0604	3/8	1/4	Brass	0.0845
179C-0606	3/8	3/8	Brass	0.1180
179C-0806	1/2	3/8	Brass	0.1481

Brass Compression Fittings

45 degree elbow with two openings for connecting two hoses or pipes with cam and groove fittings Female cam coupler at either end for connecting to

Dixon 400DD-45AL Aluminum Cam and Groove Hose Fitting, 45 Degree Elbow, 4 Socket

45 degree Elbow Connector- Double Ferrule & Pipe Fittings

BRASS COMPRESSION 45 DEGREE ELBOW

179C-0402 Dixon Valve Brass Compression Fitting - 45 deg. Elbow

Applications: * Air brake systems except where temperatures exceed +200°F or where battery acid can drip on tubing. * Not for fuel, water or oil.,

1880X12 by Danfoss | Quick Connect Air Brake Adapter | Male Connector 45° Elbow | 3/4 Tube OD x 1/2 Male NPTF | Brass

W8F8-B Dixon Valve 1 Brass 7800 Series Hydraulic Thread-to

170P-4-2 - Brass Compression Fittings for Thermoplastic and Soft

Weldable Elbows, MDC Precision Weldable Components

Specifications: * Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 bar) Maximum Working and 16,000 PSI (1,100 bar) Burst * Rated

2DBF2-B Dixon Valve Brass D-Series Quick Disconnect 1/4 Automatic Industrial Interchange Pneumatic Coupler - 1/4-19 Female BSPP