- Home
- first layer
- First layer not adhering to raft - can anyone help? - 3D Printing / 3D Printers - Talk Manufacturing
First layer not adhering to raft - can anyone help? - 3D Printing / 3D Printers - Talk Manufacturing
4.7 (673) · $ 11.00 · In stock
I’ve been happily printing for a while now with my Wanhao Duplicator i3 using PLA but a recent problem has occurred wherein, during the initial stages of a print with a large base surface area, the first layer has not stuck to the raft. This produces a surface effect similar to the gills of a fish, where, in one direction, the surface bows and parts of the filament stick up proud of the raft about 3mm high, forming raised ridges open on one side, at regular intervals. This obviously greatly int
Guide and Slicer Setting for Raft, Brim and Skirt - Knowledge
prusa i3 - Lines of PLA not sticking to the bed - 3D Printing
Raft vs Brim vs Skirt: The Differences (incl. Cura settings)
What Causes 3D Print Warping (PLA, PETG, ABS) and How to Prevent It
The Complete Resin 3D Printing Settings Guide for Beginners
First layer after raft improvements : r/FixMyPrint
Built the machine, but when I do the first layer calibration it
3D Printing - The First Layer
Optimal Layer Exposure Time for Perfect Resin Prints - Tutorial
How to fix warping
3D Printing Troubleshooting Guide
First layer not adhering to raft - can anyone help? - 3D Printing
prusa i3 - Lines of PLA not sticking to the bed - 3D Printing
/-/media/MakerIO/Images/blogs/2021/
pla - Why raft is printed much better than the actual first layer
